Installing the monitor driver in Windows 7
Note:
This section must be completed before continuing with the Windows 7 automatic
image setup.
1.
Turn off the computer and all attached devices.
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow the system to boot into
Windows 7.
4.
Click
Start
Control Panel Appearance and Personalization
Display
Change Display Settings
.
5.
Click the
Advanced Settings
.
6.
Click the
Monitor
tab.
7.
Click the
Properties
button.
8.
Click the
Drivers
tab.
9.
Click the
Update Driver.
10.
Select
“
Browse my computer for driver software
”
option.
11.
Click on the
Browse
button and navigate to the following directory:
X:\Monitor Drivers
(where
X
is the drive letter designator for the CD-ROM drive).
12.
Select the "
LT1712p.inf
" file and click the
Open
button. Click on the
OK
button.
13.
Select
Lenovo LT1712p
and click
Next
. The files will be copied from the CD to
your hard disk drive.
14.
Close all open windows and remove the CD.
15.
Restart the system.
Note:
On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1280 x 1024 at a refresh rate of 60
Hz, or 640 x 480 at a refresh rate of 60 Hz.
Chapter 3.
Reference information
3-7
