Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
·
Apply water or liquid directly to your monitor.
·
Use solvents or abrasives.
·
Use flammable cleaning materials to clean your monitor or any other electrical
equipment.
·
Touch the screen area of your monitor with sharp or abrasive items. This type of
contact may cause permanent damage to your screen.
·
Use any cleaner which contains an anti-static solution or similar additives. This
may harm the coating of the screen area.
Do:
·
Lightly dampen a soft cloth with water and use this to gently wipe the covers and
the screen.
·
Remove grease or finger marks with a damp cloth and a little mild detergent.
Chapter 2. Adjusting and using your monitor
2-8
DPS (Dynamic Power
saving
) function caring:
If you find slightly change of brightness on your monitor, please don’t worry,
that’s because the DPS(Dynamic Power
saving
) is enable, which can make
your monitor low power consumption.
And you can disable this DPS function via OSD adjust, please follow below steps:
1>
Press “Menu” key, then you will see OSD Menu.
2>
Press “Menu” key once again.
3>
Press “
→
”key to select DPS function.
4>
And then press “Menu” key.
5>
You will press “
→
” key to select DPS function on or off.
