Installing the Device Driver
Installing the Device Driver for Windows 95 or Windows 98
To install the device driver in Microsoft® Windows®95 or Windows98, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in
Windows 95 or Windows 98.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows 95 or Windows 98 operating system.
Your computer’s Plug and Play code might warn you that your system
hardware has changed. This means that it has detected your new
monitor for the first time.
4. Open the
Display Properties
window by clicking
Start, Settings
,
Control Panel
and then double clicking on the
Display
icon.
5. Click the
Settings
tab.
If you are using Windows 95:
6. 1. Click the
Change Display Type
button.
2. Click the
Change Monitor Type
button.
• If you are using Windows 98:
6. 1. Click the
Advanced
button.
2. Click the
Monitor
tab.
3. Open the
Upgrade Device Wizard
window by clicking
on
Change
button and then select the
Next
button.
4. Click “Display a list of the known drivers for this device so that
I can choose a specific driver” and then select the
Next
button.
7. Insert the Lenovo Monitor CD into the CD drive and click the
Have Disk
button.
8. Click
OK
.
9. Ensure that the CD drive letter is selected, and then select “DRIVERS” folder.
10. Select
ThinkVision C190 CRT monitor
and click
OK
. The files will be copied from
the CD to your hard disk drive.
11. Close all open windows and remove the CD.
12. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
7
