Lenovo ThinkSystem SR645, Setup Manual

Page: 10 / 188

Table 1. Server specifications (continued)
Specification Description
Heat sink
• Standard heat sink
• High-performance heat sink (T-shape)
For technical rules for processors and heatsinks, see “Technical rules for processors
and heat sinks” on page 96 .
Memory
• Slots: 32 memory module slots
• Supported memory module type:
– TruDDR4 3200, dual-rank, 16 GB/32 GB/64 GB RDIMM
– TruDDR4 3200, dual-rank, 128 GB 3DS RDIMM
• Minimum memory:
– 16 GB using RDIMMs
– 128 GB using 3DS RDIMMs
• Maximum memory:
– 2 TB using RDIMMs
– 4 TB using 3DS RDIMMs
Note:
The operating speed and total memory capacity depend on the processor
model and UEFI settings.
For a list of supported memory, see the Lenovo ServerProven Web site:
https://static.lenovo.com/us/en/serverproven/index.shtml
.
For technical rules for memory modules, see “Technical rules for DIMMs” on page
99.
Internal drives Front:
• Up to ten 2.5-inch hot-swap SAS/SATA/U.2 drives
• Up to four 3.5-inch hot-swap SAS/SATA/NVMe drives
Inside:
• Up to two internal SATA/NVMe M.2 drives
Rear:
• Up to two 2.5-inch hot-swap SAS drives
• Up to two 7mm hot-swap SATA/NVMe drives
For technical rules for drives, see “Drive bay configurations and requirements” on
page 97.
Expansion slots Depending on the model, your server supports up to three PCIe slots in the rear.
• PCIe x16, low-profile
• PCIe x16/x16, low-p low profile
• PCIe x16/x16, low p full-height
For locations and technical rules for PCIe slots, see “Rear view” on page 36 and
“Technical rules for PCIe adapters” on page 101.
6
ThinkSystem SR645 Setup Guide