Lenovo ThinkSystem NE2580O RackSwitch Installation Manual Download Page 49

Page: 49 / 92

Chapter 3: Installing NE2580O Hardware and Options

Secure the air-duct mounting bracket to the rails with M6 screws. Torque the
screws to approximately 5.7 Nm ± 0.1 Nm (50 inch-pounds).

Note:

Reuse the original M6 screws used to fasten the 4-post rack mounting

brackets to secure the air duct mounting brackets with 4-post mounting brackets
together.

Secure the air-duct mounting bracket to the rack chassis with M3.5 screws. Torque
the screws to approximately 1.1 Nm ± 0.1 Nm (10 inch-pounds).

Plug the power cords into their respective NE2580O power connectors and using
tie wraps, secure the power cords to the mounting rails.

M3.5 screws

Air duct mounting bracket

M6 screws

Tie wraps

Power connection

Summary of Contents for ThinkSystem NE2580O RackSwitch





























































































Search results

Summary of Contents for ThinkSystem NE2580O RackSwitch

Reviews:

Related manuals for ThinkSystem NE2580O RackSwitch

Brands by name

Popular brands

Lenovo ThinkSystem NE2580O RackSwitch, Installation Manual

Search results

Summary of Contents for ThinkSystem NE2580O RackSwitch

Reviews:

Related manuals for ThinkSystem NE2580O RackSwitch

Brands by name

Popular brands