Lenovo ThinkSystem DM240N Service Manual Download Page 13 | Manualshive

Page: 13 / 34

background image

b. Reconnect the power cord to the power supply, and then secure the power cord with the

power cord retainer. When functioning correctly, a power supply's bicolored LED illuminates
green.

Additionally, both NSM module port LNK (green) LEDs illuminate. If a LNK LED does not
illuminate, reseat the cable.

Step 10. Verify that the attention (amber) LEDs on the NSM module containing the failed fan and the shelf

operator display panel are no longer illuminated.
When the replacement fan reaches its expected RPM speed, the attention LEDs turn off.

Step 11. Verify that the NSM module is cabled correctly.

You can download and run ThinkSystem Intelligent Monitoring Config Advisor to verify cabling. If
any cabling errors are generated, follow the corrective actions provided.

Lenovo Downloads: ThinkSystem Intelligent Monitoring Config Advisor

Replacing a fan

9

«
...
11
12
13
14
15
...
»

Summary of Contents for ThinkSystem DM240N



































Reviews:

No comments

Related manuals for ThinkSystem DM240N

ShareCenter DNS-320L

Brand: D-Link Pages: 4

Brand: Jetter Pages: 35

EK-FC1080 GTX Ti TF6

Brand: ekwb Pages: 2

Brand: LogLogic Pages: 30

Brand: Dolphin Pages: 9

Brand: Dantel Pages: 62

Brand: FDI Pages: 2

Brand: Lutron Electronics Pages: 4

Brand: AXIOMTEK Pages: 58

Brand: Avenview Pages: 28

5200 Live Series EventCD

Brand: MF DIGITAL Pages: 21

Brand: IBM Pages: 72

Brand: Microtek Pages: 25

Brand: AC Infinity Pages: 24

Brand: Cowlacious Designs Pages: 8

Brand: ADTRAN Pages: 20

Brand: Fibocom Pages: 39

iConverter GX/F

Brand: Omnitron Systems Technology Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands