Lenovo ThinkStation 0567 User Manual Download

Page: 88 / 134

4. Click

Yes

to save your changes.

Setting the hot spare hard disk drive

This section provides instructions on how to set the hot spare hard disk drive.

To set the hot space hard disk drive, do the following:

1. Enter the LSI MegaRAID BIOS configuration utility. See “Entering the LSI MegaRAID BIOS configuration

utility” on page 74.

2. Select the hard disk drive you want to set as the hot spare hard disk drive. The Drive window is

displayed.

3. Select

Make Global HSP

Make Dedicated HSP

, and then click

4. The main screen of the LSI MegaRAID BIOS configuration utility is displayed, and the hard disk drive

you selected is listed as a hot spare hard disk drive in the right pane.

ThinkStation User Guide

Summary of Contents for ThinkStation 0567







































































































































Search results

Summary of Contents for ThinkStation 0567

Reviews:

Related manuals for ThinkStation 0567

Brands by name

Popular brands

Lenovo ThinkStation 0567, User Manual

Search results

Summary of Contents for ThinkStation 0567

Reviews:

Related manuals for ThinkStation 0567

Brands by name

Popular brands