Lenovo ThinkStation 0567 User Manual Download | Manualshive

Page: 73 / 134

background image

3. In the Please select boot device window, select the USB hard disk drive as the first boot device and

press Enter. The rescue medium starts.

When the rescue medium starts, the Rescue and Recovery workspace opens. The help information for
each feature is available from the Rescue and Recovery workspace. Follow the instructions to complete
the recovery process.

Reinstalling preinstalled applications and device drivers

Your computer has provisions that enable you to reinstall selected factory-installed applications and device
drivers.

Reinstalling preinstalled applications

This section provides instructions on how to reinstall preinstalled applications.

To reinstall the selected applications preinstalled on your Lenovo computer, do the following:

1. Turn on the computer.

2. Go to the

C:\SWTOOLS

directory.

3. Open the apps folder. Within the apps folder, there are several subfolders named for various applications

installed in your computer.

4. Open the appropriate application subfolder.

5. In the application subfolder, look for a SETUP.EXE file or other appropriate EXE files for setup.

Double-click the file and follow the instructions on the screen to complete the installation.

Reinstalling preinstalled device drivers

This section provides instructions on how to reinstall preinstalled device drivers.

Attention:

When you reinstall device drivers, you are changing the current configuration of your computer.

Reinstall device drivers only when it is necessary to correct a problem with your computer.

To reinstall the device driver for a factory-installed device, do the following:

1. Turn on the computer.

2. Go to the

C:\SWTOOLS

directory.

3. Open the DRIVERS folder. Within the DRIVERS folder, there are several subfolders named for various

devices installed in your computer, such as AUDIO or VIDEO.

4. Open the appropriate device subfolder.

5. Do one of the following:

• In the device subfolder, look for a SETUP.exe file. Double-click the file and follow the instructions on

the screen to complete the installation.

• In the device subfolder, look for a README.txt file or a file with the .txt extension. This file might be

named after the operating system, such as WIN98.txt. The TXT file contains information about how to
install the device driver. Follow the instructions to complete the installation.

• If the device subfolder contains a file with the .inf extension and you want to install the device

driver using the INF file, refer to your Windows Help and Support information system for detailed
information about how to install the device driver.

Note:

If you need updated device drivers, see “Getting the latest device drivers for your computer” on

page 79 for more information.

Chapter 6

.

Recovery information

61

«
...
71
72
73
74
75
...
»

Summary of Contents for ThinkStation 0567







































































































































Reviews:

No comments

Related manuals for ThinkStation 0567

Brand: Acer Pages: 17

Brand: Acer Pages: 19

Brand: Gateway Pages: 2

EBOX-335xDX3 Series

Brand: DMP Electronics Pages: 40

AIMB-T1217 Series

Brand: Advantech Pages: 32

Brand: CAMBRON Pages: 8

Brand: Everex Pages: 47

Brand: Compaq Pages: 110

IntelliStation Z Pro

Brand: IBM Pages: 2

Brand: Casio Pages: 126

Brand: Dell Pages: 148

Brand: Dell Pages: 18

Brand: iameco Pages: 3

Brand: DMP Electronics Pages: 38

Brand: Ergotron Pages: 6

METALLICGEAR NEO-6

Brand: Phanteks Pages: 4

Brand: Alpha Microsystems Pages: 23

Brand: S.M.S Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands