Lenovo ThinkServer TS150 Operating System Installation Manual Download Page 7

Page: 7 / 60

Chapter 2. Installing an operating system in UEFI mode

This chapter provides information about installing operating systems in UEFI mode.

Before installing an operating system in UEFI mode

This topic contains the following items:

•

“Preparing the driver” on page 3

•

“Configuring the BIOS setting” on page 3

Preparing the driver

Before installing an operating system in UEFI mode, download your desired driver from the Lenovo Web site
at http://www.lenovo.com/drivers. Then, copy the driver to a USB storage device.

Configuring the BIOS setting

Before installing an operating system in UEFI mode, configure the BIOS setting by doing the following:

1. Start the Setup Utility program.

2. On the

Startup

menu, select

CSM

and click

Disable

Installing the Microsoft Windows Server 2012 operating system

This topic provides instructions on how to install the following operating systems and the drivers:

• Microsoft Windows Server 2012 Standard Edition

• Microsoft Windows Server 2012 Foundation Edition

To install the Microsoft Windows Server 2012 operating system, do the following:

1. Insert the operating system installation disc into the optical drive that you have set as the first startup

device, and start the server from the optical drive.

Note:

If the message

Press any key to boot from cd or dvd

is displayed, press any key. If the message

Windows Setup [EMS Enabled]

is displayed, press Enter. The message

Loading files...

will be displayed.

Wait several minutes for the system to load the files.

2. In the Windows Server 2012 window, select the language and other options. Then click

Next

3. Click

Install now

4. Type your product key and then click

Next

. The product key information is available on the Microsoft

Certificate of Authenticity label or product packaging.

5. Select the operating system you want to install, and then click

Next

6. Read the license terms and select

I accept the license terms

. Then click

Next

7. Select the type of installation you need. The following steps are based on the scenario that

Custom:

Install Windows only (Advanced)

is selected in this step.

8. In the “Where do you want to install Windows?” window, depending on the SATA configuration on

your server, do one of the following:

• If your SATA configuration is set as

RAID

(both

OB SATA RAID

ADD on RAID card

): do the

following:

Summary of Contents for ThinkServer TS150





























































Search results

Summary of Contents for ThinkServer TS150

Reviews:

Related manuals for ThinkServer TS150

Brands by name

Popular brands

Lenovo ThinkServer TS150, Operating System Installation Manual

Search results

Summary of Contents for ThinkServer TS150

Reviews:

Related manuals for ThinkServer TS150

Brands by name

Popular brands