e. In the Allowable Drives window, select the hard disk drive on which you want to install the
operating system.
f. Type the amount of space (in MB) of the new partition and then click
OK
.
• Manually create a swap partition
To create a swap partition, do the following:
a. Click
Create
. The Create Storage window is displayed.
b. Select
Standard Partition
and then click
Create
.
c. In the Add Partition window, select
swap
from the
File System Type
drop-down list box.
d. In the Allowable Drives window, select the hard disk drive on which you want to install the
operating system.
e. Type the amount of space (in MB) of the new partition and then click
OK
.
13. If the Format Warnings window is displayed, click
Format
to format the hard disk drive.
14. In the “Writing storage configuration to disk” window, click
Write changes to disk
.
15. In the “Boot loader operating system list” window, click
Next
.
16. The default installation is a basic server installation. You can customize your server by selecting a
different set of software from the software list or adding additional repositories that you want to use
for the software installation. Select
Customize now
or
Customize later
. Then, click
Next
. The
installation process begins.
Notes:
• If you select
Customize now
, you can select software installation packages of your choice. Then,
click
Next
.
• When installing the operating system in UEFI mode, do not select the package named
tboot-1.7.4-1.el6.x86_64 - Perfomrms a verified launch using Intel TXT
.
• If a warning message is displayed, configure the settings. The following steps are based on the
scenario that
Continue
is selected in this step.
17. After the installation is completed, click
Reboot
to restart your server.
18. The installation continues after the server restarts. In the Welcome window, click
Forward
.
19. Click
Yes, I agree to the License Agreement
and then click
Forward
.
20. In the Set Up Software Updates window, configure the settings, and then click
Forward
.
21. In the Finish Updates Setup window, click
Forward
.
22. Set your user name and password and then click
Forward
.
23. Set your time and date and then click
Forward
.
24. In the Kdump window, select
Enable kdump
if you want to enable kdump, and then click
Finish
to complete the installation.
Note:
When prompted to restart the server, click
Yes
➙
OK
.
25. Follow the instructions on the screen to log in to the operating system.
Installing drivers for the Red Hat Enterprise Linux AS 6.5 (x64) operating
system
Note:
The drivers for the Ethernet card, HBA card, and CNA card are installed during the operating system
installation.
To install the driver for an onboard graphics card, do the following:
Installing an operating system in legacy mode
39
Summary of Contents for ThinkServer TD340
