Lenovo ThinkServer RS160, User Manual And Hardware Maintenance Manual

Page: 98 / 142

4. Use the Setup Utility program to set the date, time, and any passwords. See “Using the Setup Utility
program” on page 29.
Front panel board
• “Removing the front panel board” on page 84
• “Installing the front panel board” on page 84
Removing the front panel board
Note: The front panel board is sensitive to ESD. Ensure that you read and understand “Handling
static-sensitive devices” on page 46 first and carefully perform the operation.
To remove the front panel board, do the following:
1. Prepare your server. See “Preparing your server in advance” on page 47.
2. Locate the front panel board. See “Server components” on page 16.
3. If necessary, remove the HDDs behind the front panel board. See “Removing a 2.5-inch hard disk drive”
on page 72 and “Removing a 3.5-inch hard disk drive” on page 75.
4. Remove the two screws that secure the front panel board. Then, carefully remove the front panel
board from the chassis.
Figure 65. Removing the front panel board
5. Record the cable routing and cable connections. Then, disconnect all the cables from the front panel
board.
6. If you are instructed to return the old front panel board, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
Installing the front panel board
Note: The front panel board is sensitive to ESD. Ensure that you read and understand “Handling
static-sensitive devices” on page 46 first and carefully perform the operation.
To install the front panel board, do the following:
1. Touch the static-protective package that contains the new front panel board to any unpainted surface
on the outside of the server. Then, take the new front panel board out of the package.
Note: Carefully handle the front panel board by its edges.
2. Connect all the cables to the new front panel board.
84
ThinkServer RS160 User Guide and Hardware Maintenance Manual