Lenovo ThinkPad W500, Hardware Maintenance Manual

Page: 55 / 272

The options on the test menu are as follows:
Diagnostics Interactive Tests
v
Run Normal Test
v
Run Quick Test
v
CPU/Coprocessor
v
Systemboard
v
Video Adapter
v
Serial Ports
v
Parallel Ports
v
Fixed Disks
v Diskette Drives
v
Other Devices
v ThinkPad Devices
v
Communication
v Wireless LAN
v
Advanced Memory Tests
v
Keyboard
v
Video
v
Internal Speaker
v
Mouse
v
Diskette
v
System Load
v
Optical Drive Test
v
Intel WLAN Radio Test
Notes:
v
In the Keyboard test in Interactive Tests , the Fn key should be held down for at least 2
seconds; otherwise, it cannot be sensed.
v
Video Adapter test supports only the LCD display on the ThinkPad Notebook. If you
have an external monitor attached to your computer, detach it before running PC-Doctor
for DOS.
v
To test Digital Signature Chip , the security chip must be set to Active.
v
To test Serial Ports or Parallel Ports , the ThinkPad Notebook must be attached to the
docking station.
10. Run the applicable function test.
11.
Follow the instructions on the screen. If there is a problem, PC-Doctor shows
messages describing it.
12. To exit the test, select Quit — Exit Diag .
To cancel the test, press Esc.
Note: After running PC-Doctor, check the time and date on the system and reset
them if they are incorrect.
Detecting system information with PC-Doctor
PC-Doctor can detect the following system information:
Hardware Info
v
System Configuration
v
Memory Contents
v
Physical Disk Drives
v
Logical Disk Drives
v
VGA Information
v
IDE Drive Info
v
PCI Information
v
PNPISA Info
v
SMBIOS Info
v
VESA LCD Info
v
Hardware Events Log
Utility
v
Run External Tests
v
Surface Scan Hard Disk
v
Benchmark System
General checkout
47