Lenovo ThinkPad T440p User Manual Download Page 28

Page: 28 / 183

Storage device

Depending on the model:

• 2.5-inch form factor, 9.5-mm height hard disk drive

• 2.5-inch form factor, 7-mm height hard disk drive

• 2.5-inch form factor, 7-mm height solid-state drive

• M.2 solid-state drive for caching only

Display

• Color display with the thin-film transistor (TFT) technology

• Display size: 355.6 mm (14 inches)

• Display resolution: 1920-by-1080, 1600–by-900, or 1360–by-768

• Brightness control

• Camera (on some models)

• Microphones

Keyboard

• 6-row backlit keyboard

• Function keys

• ThinkPad pointing device

Interface

• 4-in-1 media card reader

• Audio connector

• Always-on USB connector

• Docking station connector

• Ethernet connector

• Mini DisplayPort connector

• Serial Ultrabay Enhanced bay

• Smart card reader (on some models)

• USB 2.0 connector

• USB 3.0 connectors

• VGA connector

GPS and wireless features

• Global Positioning System (GPS) satellite receiver (on some models)

• Bluetooth

• Wireless LAN

• Wireless WAN (on some models)

• NFC (on some models)

Security feature

• Fingerprint reader (on some models)

User Guide

Summary of Contents for ThinkPad T440p
























































































































































































Search results

Summary of Contents for ThinkPad T440p

Reviews:

Lenovo ThinkPad T440p, User Manual, Page: 28 / 183

Search results

Summary of Contents for ThinkPad T440p

Reviews: