Lenovo ThinkPad T440p User Manual Download

Page: 127 / 183

Table 4. Config menu items (continued)

Menu item

Submenu item

Value

Comments

connector on a docking
station.

Intel SpeedStep

technology

• Disabled

•

Enabled

Mode for AC

•

Maximum Performance

• Battery Optimized

Mode for Battery

• Maximum Performance

•

Battery Optimized

Select the mode of Intel
SpeedStep technology at
runtime.

Maximum Performance:

Always the highest speed.

Battery Optimized:

Always

the lowest speed.

Disabled:

The highest

speed, and runtime is not
supported.

Adaptive Thermal
Management

Scheme for AC

•

Maximize Performance

• Balanced

Scheme for Battery

• Maximize Performance

•

Balanced

Select a thermal
management scheme
to use.

Maximize Performance:

Reduce microprocessor
throttling.

Balanced:

Balance

sound, temperature, and
performance.

Note:

Each scheme affects

fan sound, temperature,
and performance.

CPU Power Management

• Disabled

•

Enabled

Enable or disable the
power-saving feature that
stops the microprocessor
clock automatically when
there are no system
activities. Normally, it
is not necessary to change
the setting.

Power On with AC Attach

•

Disabled

• Enabled

Enable or disable the
feature that powers on the
system when the ac power
adapter is attached.

If you select

Enabled

, the

system is powered on when
the ac power adapter is
attached. If the system is in
hibernate state, the system
resumes normal operation.

If you select

Disabled

, the

system is not powered on
nor resumed when the ac
power adapter is attached.

Power

Chapter 8

Advanced configuration

111

Summary of Contents for ThinkPad T440p
























































































































































































Search results

Summary of Contents for ThinkPad T440p

Reviews:

Related manuals for ThinkPad T440p

Brands by name

Popular brands

Lenovo ThinkPad T440p, User Manual

Search results

Summary of Contents for ThinkPad T440p

Reviews:

Related manuals for ThinkPad T440p

Brands by name

Popular brands