Lenovo ThinkPad E40, Hardware Maintenance Manual

Page: 65 / 206

Table 13. Removal steps of DIMM
1
1
2
Note: If only one DIMM is used on the computer you are servicing, the card must be installed in SLOT-0 (
a
: lower
slot), but not in SLOT-1 (
b
: upper slot).
b
a
When installing: Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it
snaps into the place. Make sure that it is firmly fixed in the slot and does not move easily.
1070 Fan assembly
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 54
• “1040 Thermal cover” on page 56
Attention:
• Do not handle the fan roughly. Improper handling of the fan can cause distortion or deformation and
imperfect contact with components.
• Do not touch or apply any excessive force to the fan motor. It might cause damage to the fan assembly or
the computer to mulfunction.
Chapter 8
.
Removing and replacing a FRU
59