Lenovo ThinkCentre M90p, Maintenance Manual, Page: 51 / 112

Diagnostic Error Code FRU/Action
000-038-XXX BIOS Extension failure 1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 98
2. Adapter card
3. System board
000-039-XXX BIOS DMI data error 1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 98.
2. System board
000-195-XXX BIOS Test aborted by user Information only Re-start the test, if necessary
000-196-XXX BIOS test halt, error threshold exceeded 1. Press F3 to review the log file
2. Re-start the test to reset the log file
000-197-XXX BIOS test warning 1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility program” on page 39
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
000-198-XXX BIOS test aborted 1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility program” on page 39
2. Flash the system and retest. See “Updating (flashing)
BIOS from a disc” on page 98
3. Go to “Undetermined problems” on page 64
000-199-XXX BIOS test failed, cause unknown 1. Go to “Undetermined problems” on page 64
2. Flash the system and re-test
3. Replace component under function test
000-250-XXX BIOS APM failure 1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 98
2. System board
000-270-XXX BIOS ACPI failure 1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 98
2. System board
001-000-XXX System Test Passed No action
001-00X-XXX System Error System board
001-01X-XXX System Error System board
001-024-XXX System Addressing test failure System board
001-025-XXX System Checksum Value error 1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 98
2. System board
001-026-XXX System FLASH data error 1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 98
2. System board
Chapter 7
.
Symptom-to-FRU index
45