manualshive.com logo in svg

Lenovo ThinkCentre E93, User Manual, Page: 18 / 162

Share
Download
Lenovo ThinkCentre E93 User Manual Download Page 18

Accessing Lenovo programs on the Windows 8 or Windows 8.1 operating
system

If your computer is preinstalled with the Windows 8 or Windows 8.1 operating system, you can access
Lenovo programs by doing one of the following:

• On the Windows 8 operating system, press the Windows key

to go to the Start screen. Click a Lenovo

program to launch it. If you cannot find the program you need, move the pointer to the bottom-right corner
of the screen to display the charms. Then click the

Search

charm to search for the desired program.

• On the Windows 8.1 operating system, press the Windows key

to go to the Start screen. Click a

Lenovo program to launch it. If you cannot find the program you need, click the arrow icon

in the

bottom-left corner of the screen to go to the Apps screen. Find the desired program in the apps list or
search for it in the search box in the top-right corner of the screen.

Depending on your computer model, your computer supports some of the following Lenovo programs:

• Fingerprint Manager Pro or ThinkVantage Fingerprint Software

• Lenovo Bluetooth Lock (Windows 8.1 only)

• Lenovo Companion

• Lenovo Reach

• Lenovo SHAREit

• Lenovo Solution Center

• Lenovo Support

• Lenovo Tools

• Password Manager

• PC Cloud Manager (Windows 8.1 only)

• Power Manager

• System Update

An introduction to Lenovo programs

This topic provides a brief introduction to some Lenovo programs.

Note:

Depending on your computer model, some of the programs might not be available.

•

Communications Utility (Windows 7)

The Communications Utility program provides a central location for integrated camera and microphone
settings. It controls advanced settings for the integrated microphone and camera to optimize Web
conferencing and Voice over IP (VOIP) experience.

•

Fingerprint Manager Pro or ThinkVantage Fingerprint Software (Windows 7, Windows 8, and
Windows 8.1)

The integrated fingerprint reader provided on some keyboards enables you to enroll your fingerprint
and associate it with your power-on password, hard disk password, and Windows password. As a
result, fingerprint authentication can replace passwords and enable simple and secure user access. A
fingerprint reader keyboard is available with select computers or can be purchased for computers that
support this option.

•

Lenovo Bluetooth Lock (Windows 7 and Windows 8.1)

The Lenovo Bluetooth Lock program enables you to use a Bluetooth device (such as your smartphone) as
a proximity-based unit for locking or unlocking your computer automatically. By detecting the distance
between your computer and the predefined Bluetooth device that you are carrying, the Lenovo Bluetooth

6

ThinkCentre E93 User Guide

Summary of Contents for ThinkCentre E93



































































































































































Reviews:

No comments