Lenovo ThinkAgile CP 4000 Series, Upgrade Manual

Page: 32 / 68

To check the drive firmware level, use the following command and check the values in the
FW Rev
column:
# # n nvvm mee lliisstt
Following is an example output:
Node SN Namespace Usage Format FW Rev
-------------- ---------------- ... --------- ----------------------- ------------- --------
/dev/nvme0n1 S3HCNX0JC02194
1 795.00 GB / 795.00 GB 512 B + 0 B GPNA9B3Q
/dev/nvme1n1 S3HCNX0JC02193 1 795.00 GB / 795.00 GB 512 B + 0 B GPNA9B3Q
/dev/nvme2n1 S3HCNX0JC02233 1 795.00 GB / 795.00 GB 512 B + 0 B GPNA9B3Q
/dev/nvme3n1 S3HCNX0JC02191 1 795.00 GB / 795.00 GB 512 B + 0 B GPNA9B3Q
/dev/nvme4n1 S3HCNX0JC02189 1 795.00 GB / 795.00 GB 512 B + 0 B GPNA9B3Q
/dev/nvme5n1 S3HCNX0JC02198 1 795.00 GB / 795.00 GB 512 B + 0 B GPNA9B3Q
/dev/nvme6n1 S3HCNX0JC02188 1 795.00 GB / 795.00 GB 512 B + 0 B GPNA9B3Q
/dev/nvme7n1 S3HCNX0JC02195 1 795.00 GB / 795.00 GB 512 B + 0 B GPNA9B3Q
Check that the NVME namespace before installing the new drives:
# # llss //d deevv//n nvvm mee? ?
Following is an example output:
/dev/nvme0 /dev/nvme1 /dev/nvme2 /dev/nvme3 /dev/nvme4 /dev/nvme5 /dev/nvme6 /dev/nvme7
/dev/nvme8 /dev/nvme9 /dev/nvme10 /dev/nvme11 /dev/nvme12 /dev/nvme13 /dev/nvme14 /dev/nvme15
The new drives are now added to the RAID array as spare devices.
The set of eight (8) drives is installed in the storage block.
The eight drives need to be added to the Cloud Controller. See Adding drives to the Cloud Controller.
24
Lenovo ThinkAgile CP Storage Capacity Upgrade Guide