Lenovo TAB 2 A10-70 Hardware Maintenance Manual Download Page 10

Page: 10 / 82

Lenovo TAB 2 A10-70 Hardware Maintenance Manual

• Always look carefully for possible hazards in your work area. Examples of

these hazards are moist floors, nongrounded power extension cables, power
surges, and missing safety grounds.

• Do not touch live electrical circuits with the reflective surface of a plastic

dental mirror. The surface is conductive; such touching can cause personal
injury and machine damage.

• Do not service the following parts with the power on when they are removed

from their normal operating places in a machine:

—

Power supply units

—

Pumps

—

Blowers and fans

—

Motor generators

and similar units. (This practice ensures correct grounding of the units.)

• If an electrical accident occurs:

—

Caution: do not become a victim yourself.

—

Switch off the power.

—

Send the victim to get medical aid.

Summary of Contents for TAB 2 A10-70



















































































Search results

Summary of Contents for TAB 2 A10-70

Reviews:

Related manuals for TAB 2 A10-70

Brands by name

Popular brands

Lenovo TAB 2 A10-70, Hardware Maintenance Manual

Search results

Summary of Contents for TAB 2 A10-70

Reviews:

Related manuals for TAB 2 A10-70

Brands by name

Popular brands