Lenovo Storage N3310, User Manual And Hardware Maintenance Manual

Page: 70 / 152

To install the TSM Premium module, do the following:
1. Remove all external media from the drives and turn off all attached devices and the storage product.
Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the storage product.
2. Prepare your storage product. See “Removing or extending the storage product from the rack cabinet”
on page 43.
3. Remove the storage product cover. See “Removing the cover” on page 43.
4. Remove the riser card assembly 2. See “Replacing the riser card assembly” on page 103.
5. Touch the static-protective package that contains the TSM Premium module to any unpainted surface
on the outside of the storage product. Then, take the TSM Premium module out of the package.
6. Locate the TSM Premium module connector on the system board and then insert the TSM Premium
module into the TSM Premium module connector.
Note: Ensure that the TSM Premium module is securely seated on the system board.
Figure 22. Installing the TSM Premium module
7. Reinstall the riser card assembly 2. See “Replacing the riser card assembly” on page 103.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to “Completing the parts replacement” on page 112. For information
about storage product remote management, download and read the ThinkServer System Manager User
Guide at:
http://www.lenovo.com/support
Removing the TSM Premium module
Attention: Do not open your storage product or attempt any repair before reading and understanding “Safety
information” on page iii and “Guidelines” on page 41.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
56
Lenovo Storage N3310 User Guide and Hardware Maintenance Manual