background image

March 2016

Page 9

ServeRAID M5100 Series Battery Kit Quick Installation Guide

Product Overview

Quick Installation Guide

Thank you for purchasing the ServeRAID M5100 Series Battery Kit. Before you install 
and connect the ServeRAID M5100 Series Battery Kit, please take a few minutes to read 
this quick installation guide. This guide explains how to connect the ServeRAID M5100 
Series Battery Kit remotely to your ServeRAID M5100 Series Controller. If you need more 
information about any topic covered in this guide, refer to the related documents on 
your ServeRAID-M Documentation CD.

Product Overview

The ServeRAID M5100 Series Battery Kit provides an inexpensive alternative to using an 
uninterruptible power supply (UPS) and a second level of fault tolerance when used 
with a UPS.

The ServeRAID M5100 Series Battery Kit product is an intelligent battery backup unit 
(iBBU) based on Lithium ion (LiON) battery cell technology. The unit protects the 
integrity of the cached data on a ServeRAID M5100 Series Controller for up to 48 hours 
(depending on the derated retention time selected) in case of a complete AC power 
failure or a brief power outage.

Connect the remote ServeRAID M5100 Series Battery Kit unit by cable to the ServeRAID 
M5100 Series 512MB Cache/RAID 5 Upgrade, which is a transportable memory module 
installed on the following ServeRAID controllers:

ServeRAID M5110 SAS/SATA Controller 

ServeRAID M5120 SAS/SATA Controller

For the procedures, see 

Connecting a Remote ServeRAID M5100 Series Battery Kit Unit on 

the System Chassis to a ServeRAID-M5100 Series 512MB Cache/RAID 5 Upgrade on a 
ServeRAID Controller

.

CAUTION:

The battery used in this device might present a fire or chemical burn hazard 

if mistreated. Do not disassemble, heat above 100 °C (212 °F) or incinerate. Dispose of 
used battery properly. Keep away from children.

Top View and Bottom View of the 
ServeRAID M5100 Series Battery 
Kit

The following figure shows the top view and the bottom view of the ServeRAID M5100 
Series Battery Kit. The top view is the side that you can see after you install the 
ServeRAID M5100 Series Battery Kit on the system chassis. 

ServeRAID M5100 Series Battery Kit

Summary of Contents for ServeRAID M5100 Series














Reviews: