5
POWER CORD
NOTES
Power Source:
1. Make sure the power cord is th e correct type required in your area.
2. This LCD monitor has an External universal power supply that allows
operation in either 100/120V AC or 220/240V AC voltage area (No user
adjustment is required.)
3. Connect the power cord into your LCD monitor’s power input socket, and
then plug the other end into a 3 -pin AC power outlet. The power cord may
be connected to either a wall power outlet or the power outlet socket on
your PC, depending on the type of power cord supplied with your LCD
monitor.
A certified power supply cord has to be used with this equipment. The
relevant national installation and/or equipment regulations shall be
considered. A certified power supply cord not lighter than ordinary polyvinyl
chloride flexible cord according to IEC 60227 (designation H05VV-F 3G
0.75mm
2
or H05VVH2-F2 3G 0.75mm
2
) shall be used. Alternatively a flexible
cord of synthetic rubber according to IEC 60245 (designation H05RR-F 3G
0.75mm
2
) may be used.
Connecting the signal cable
:
Connect the signal cable’s 15 pin plug to
monitor’s signal input port, locked it with screws. Then plug the other end to
display card output port,locked it with screws.
Connecting the Power Cord:
Plug the power cord into the LCD
monitor's AC power socket. Then plug the power cord into a grounded
AC outlet or UL-approved power strip or the power output socket on your PC.
CONTROLS AND CONNECTORS
