Lenovo ideacentre Y700, Maintenance Manual, Page: 34 / 55

a. Align the cover with the guide track on the computer case, then slide the cover in.
b. Push the cover till it’s lock position.
c. Push the cover lock to lock position.
Removing the front bezel
Note: For this procedure, it helps to lay the computer flat.
To remove the front bezel:
Step 1. Remove the computer cover. Refer to “Removing the computer cover”.
Step 2. Remove the front bezel by releasing the three plastic tabs inside the chassis and pulling the bezel
out as shown.
Step 3. To reattach the bezel, align the plastic tabs on the bottom of the bezel with the corresponding holes
in the chassis, and then snap it into position.
Cleaning front dust screen
To replace the system fan:
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4. Remove the computer cover. Refer to “Removing the computer cover”.
Step 5. Remove the computer cover. Refer to “Removing computer cover”.
Step 6. Remove the front bezel. Refer to “Removing the front bezel”.
28
ideacentre Y700–900 Hardware Maintenance Manual