2-10 Curved Panel Monitor User’s Guide
Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor�
Do not:
• Apply water or liquid directly to your monitor�
• Use solvents or abrasives�
• Use flammable cleaning materials to clean your monitor or any other electrical equipment�
• Touch the screen area of your monitor with sharp or abrasive items� This type of contact may
cause permanent damage to your screen�
• Use any cleaner which contains an anti-static solution or similar additives� This may harm the
coating of the screen area�
Do:
• Lightly dampen a soft cloth with water and use this to gently wipe the covers and the screen�
• Remove grease or finger marks with a damp cloth and a little mild detergent�
Detaching the monitor base and stand
Step 1: Place the monitor on a soft and flat surface�
Step 2: Remove the screws from base before detaching base and stand from the monitor�
Wall Mounting (Optional)
Refer to the instructions that come with the VESA compatible base mounting kit�
1� Place the monitor face down in the original packing�
2� Remove the stand�
3� Attach the mounting bracket from the wall mounting kit to the monitor�
4� Mount the monitor on the wall by following the instructions that come with the base mounting
kit�
NOTE: For use only with UL and GS Listed Wall Mount Bracket with minimum weight/load bearing
capacity of 12�0 kg� In order to fulfil TCO Certification for this wall mounting option, shielded
power cable is mandatory to be used�
4 screws (M4)
