6. Install the optical drive bracket on the optical drive.
7. Install the optical drive.
8. Connect the signal cable and the power cable to the new optical drive.
9. Reinstall all the removed parts.
10. Reconnect the power cord and all disconnected cables to the computer.
Note:
If a locking device is available, use it to lock the computer.
Storage drive
Prerequisite
Before you start, read Appendix A “Important safety information” on page 65 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See “Computer cover” on page 38.
2. Remove the front bezel. See “Front bezel” on page 39.
3. Remove the optical drive. See “Optical drive” on page 41.
42
User Guide
Summary of Contents for 90MV
