Lenovo 7X59 Setup Manual Download Page 143

Page: 143 / 260

2.5-inch AnyBay/NVMe 8-bay drive backplane kit

See this section to identify parts that are enclosed in the 2.5-inch AnyBay/NVMe 8-bay drive backplane kit.

This option kit comes with the following components.

Figure 31. 2.5-inch 8-bay SAS/SATA backplane kit

One power cable, 155 mm

One power cable, 220 mm

Eight one-bay drive fillers

One AnyBay/NVMe label

Two screws

One 2.5-inch 8-bay AnyBay/NVMe

backplane

One drive backplane carrier

See the following to identify connectors on the drive backplane.

Figure 32. AnyBay/NVMe drive backplane connectors

NVMe signal connector (6-7)

NVMe signal connector (4-5)

SAS/SATA signal connector

Backplane power/configuration connector

NVMe signal connector (2-3)

NVMe signal connector (0-1)

Follow the instructions in “Install a drive backplane carrier assembly” on page 182 to install the option kit.

2.5-inch drive SAS/SATA cable kits

See this section to identify parts that are enclosed in the SAS/SATA cable kits.

On-board connector and 8i RAID adapter cable kit

See this section to identify parts that are enclosed in the On-board connector and 8i RAID adapter cable kit.

This option kit comes with the following components.

Chapter 4

Server options

135

Summary of Contents for 7X59





































































































































































































































































Search results

Summary of Contents for 7X59

Reviews:

Related manuals for 7X59

Brands by name

Popular brands

Lenovo 7X59, Setup Manual

Search results

Summary of Contents for 7X59

Reviews:

Related manuals for 7X59

Brands by name

Popular brands