Lenovo 6300, User Manual

Page: 33 / 51

4-2 Chapter 4: BIOS Setup
Entering System Setup
When you turn on your system, press <DEL> key immediately to enter CMOS Setup
Utility. You have to press <DEL> key fast enough before it starts up the operating
system. If you are not able to enter the Setup Utility through this, reboot your
computer and repeat the above procedure.
If the computer detects discrepancies between your CMOS data and actual system
configuration, it will prompt you with an error message and request you to run setup.
Just the same, you can enter setup by pressing <DEL> key.
The following main menu appears upon entering Setup Utility:
Use the cursor keys to move to the required item and press <Enter> to select.
<PgUp>, <PgDn>, <+> or <-> keys are used to modify configuration data. Help
message is provided at the bottom of the screen. Each item and corresponding
options available are discussed in the succeeding sections.
Standard CMOS Features
This sub-menu allows you to configure basic system settings such as current date and
time, type of storage devices installed in the system, and type of display monitor
connected to the system.