background image

CHAPTER 

2

 

 

Specifications 

This chapter lists the standard features and technical specifications of your 
motherboard. 

 

Standard Features 

%"

Socket-370 single Intel Celeron / Pentium III (PPGA/FC-PGA) processor at 
66/100/133 MHz CPU-Host bus speed (depending on particular model) 

%"

128K/256K second-level cache in CPU (depending on particular model) 

%"

Designed using 810/E Intel chipset with 82810/E Graphics and Memory Controller 
Hub (GMCH/E) and 82801AA I/O Controller Hub (ICH) (depending on particular 
model) 

%"

Two 3.3V, 168-pin DIMM sockets supporting up to 512MB PC-100 SDRAM 

%"

Integrated LPC Super I/O Controller with system hardware status monitoring 

%"

Integrated IDE, USB and enhanced DMA controllers 

%"

4Mb Firmware Hub with Award Flash BIOS 

%"

Supports ACPI 1.0, APM 1.2, Plug and Play, PC Health Monitoring  

%"

Built-in ports: serial port, parallel port, PS/2 keyboard port, PS/2 mouse port, VGA 
port, USB ports x2 (front), Game/Midi port, line in, line out, earphone and 
microphone in. 

%"

FlexATX form-factor providing three PCI slots, and one AMR slot  

 

 

Technical Specifications 

 
 

CPU (Central Processing Unit) 

&"

Intel Celeron or Pentium III with Built-in L2 cache (128KB and 256KB respectively) 

&"

PPGA (Plastic Pin Grid Array) or FC-PGA (Flip-Chip) CPU packaging 

&"

Front Side Bus (FSB) of 66 / 100 / 133 MHz 

 

 

 

Summary of Contents for 6300




















































Reviews: