Lenovo 6300, User Manual

Page: 35 / 51

4-4 Chapter 4: BIOS Setup
When you press <Enter> key while you are in the ‘IDE HDD Auto-Detection’ field,
BIOS will automatically detect and display the drive parameters.
Description for other fields as follows:
Item Options Description
IDE Primary Master Auto
Manual
None ‘Auto’ lets BIOS detect the installed
device automatically.
‘Manual’ allows you to enter the
parameters instead.
‘None’ indicates that no IDE device is
installed.
Access Mode
Normal
LBA
Large
Auto
‘Normal’ is used for hard disks with
less than 528MB disk capacity.
‘LBA’ is used for devices over 528MB
that support Logical Block
Addressing (LBA).
‘Large’ is used for devices over
528MB but does not support LBA.
‘Auto’ lets BIOS automatically
determine the correct mode.
Capacity
--
Cylinder
0~65535
Head
0~255
Precomp
0~65535
Landing Zone
0~65535
Sector
0~255
These fields represent the drive
parameters of the IDE device
installed.