Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 7,
Microsoft Windows 10.
Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following
:
1.
Turn off the computer, all attached devices.
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow your computer to start the
Windows 7 operating system.
4.
From the
L
enovo website http
://
support.lenovo.com
/
docs
/
T
32
h
_
20
, find the
corresponding monitor driver and download it to a PC to which this monitor is
connected (such as a desktop).
5.
Open the
Display Properties
window by clicking
Start, Control Panel and
Hardware and Sound
icon. and then clicking the
Display
icon.
6.
Click the
Change the display settings
tab.
7.
Click the
Advanced Settings
icon.
8.
Click the
Monitor
tab.
9.
Click the
Properties
button.
10. Click the
Driver
tab.
11. Click
Update Driver,
then click
Browse the computer to find the driver program.
12. Select
Pick from the list of device driver program on the computer
.
13. Click the
Hard Disk
button. By clicking the
Browse
button, browse and point to
the following path
:
X:\Monitor Drivers\Windows 7
(where
X
indicates
"
the folder in which the downloaded driver is located
"
(such as
a desktop)).
14. Select the
"T
32
J
-
2
0.inf"
file and click the
Open
button. Click the
OK
button.
15. In the new window, select
L
enovo
T
32
J
-
2
0
and click
Next
.
16. After the installation is complete, delete all downloaded files and close all
windows.
17. Restart the system. The system will automatically select the maximum refresh
rate and corresponding Color Matching Profiles.
Note:
On
L
CD monitors, unlike CRTs, a faster refresh rate does not improve display
q
uality.
L
enovo recommends using either
256
0 x 1
44
0 at a refresh rate of 60 Hz, or 640
x 480 at a refresh rate of 60 Hz.
Chapter 3.
3-5
