Hardware Maintenance Manual
38
Replacing the power adapter
To replace the power adapter:
1. Remove any media (diskettes, CDs, or memory cards) from the drives,
shut down your operating system, and turn off all attached devices
and the computer.
2. Disconnect the power adapter from the computer and connect the
new power adapter to the same connector.
Completing the installation
After replacing the parts, you need to close the computer cover and
reconnect the cables, including telephone lines and power cables. Also,
depending on the part that was replaced, you might need to confirm the
updated information in the Setup Utility program. Refer to “Starting the
Setup Utility” in the
User Guide
or in the
Hardware Maintenance Manual
.
