62
Chapter 6. Safety, Use, and Care Information
outlet. If you cannot insert the plug into the outlet, contact an
electrician for an approved outlet adapter or to replace the outlet with
one that enables this safety feature. Never overload an electrical outlet.
The overall system load should not exceed 80 percent of the branch
circuit rating. Consult an electrician for more information if you have
questions about power loads and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily
accessible, and located close to the equipment. Do not fully extend
power cords in a way that will stress the cords.
Be sure that the power outlet provides the correct voltage and current
for the product you are installing.
Carefully connect and disconnect the equipment from the electrical
outlet.
Power supply statement
Danger:
Never remove the cover on a power supply or any part that has the
following label attached.
Y550 UG V1.0_en.book Page 62 Wednesday, December 10, 2008 4:51 PM
