Lenovo 3000 H200 Hardware Maintenance Manual Download Page 57 | Manualshive

Page: 57 / 58

background image

Hardware Maintenance Manual

54

Statement

A

Thanks for using Lenovo products.

Carefully read all documents shipped with your computer before you
install and use the product for the first time for better use of it. If you
fail to operate the product according to instructions and requirements
in all the manuals included with your computer, or operate the product
inappropriately for reasons such as misunderstanding, Lenovo (Beijing)
Co., Ltd. will not be responsible for any loss caused except those arising
from the installation and operations carried out by Lenovo professional
service staff.

Lenovo (Beijing) Co., Ltd. has performed strict collation for all the manuals
included with your computer, but we cannot guarantee that it has no
mistake and omission.

To provide better service, Lenovo (Beijing) Co., Ltd. reserves the right to
improve and/or modify the products and software programs described
in all the manuals included with your computer and the content of the
manual at any time without additional notice.

All the manuals included with your computer is provided to help you
use Lenovo products appropriately, but it does not represent any
description of the software/hardware configuration for the product. For
the configuration of the product, refer to related contract (if any), product
packing list for the product or consult the distributor for the product sales.

The content of all the manuals included with your computer is protected
by copyright laws and rules. All the manuals included with your computer
may not be reproduced or transcribed by any means, or transmitted
through wired or wireless network in any form, or translated into any
language without prior written permission of Lenovo (Beijing) Co., Ltd.
Copyright ©2007 Lenovo (Beijing) Co., Ltd. All rights reserved.

The software interface and hardware configuration involved in all
the manuals included with your computer depends on the actual
configuration of the computer you purchase.

«
...
55
56
57
58
»

Summary of Contents for 3000 H200



























































Reviews:

No comments

Related manuals for 3000 H200

Brand: T-MAG Pages: 22

Brand: IBM Pages: 52

Brand: IBM Pages: 78

Brand: IBM Pages: 90

Brand: Layher Pages: 6

Brand: IBM Pages: 102

ZBOX PRO ZP-QK7P3000

Brand: Zotac Pages: 25

Brand: Tandy Pages: 129

Brand: Korg Pages: 233

Brand: Dell Pages: 13

Brand: Lakeside Industries Pages: 26

NetVista A40i 2251

Brand: IBM Pages: 98

Presario Notebook PC

Brand: Compaq Pages: 1

Presario CQ3300 - Desktop PC

Brand: Compaq Pages: 1

Brand: Compaq Pages: 2

Deskpro Workstation AP230

Brand: Compaq Pages: 31

Deskpro EN Series

Brand: Compaq Pages: 53

dc7800 - Convertible Minitower PC

Brand: Compaq Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands