Lenovo 11A9000DUK User Manual Download

Page: 8 / 116

5. SD-card reader slot*

Supported cards:

• Secure Digital (SD) card

• Secure Digital eXtended-Capacity (SDXC) USH-1 card

• Secure Digital High-Capacity (SDHC) USH-1 card

Note:

Your computer does not support the content protection for recordable

media (CPRM) feature for the SD card.

See “Use a media card (for selected models)” on page 14.

6. Microphone connector

Connect a microphone.

7. Headphone connector

Connect headphones to your computer.

8. USB 3.1 Gen 2 connectors (2)

Connect USB-compatible devices, such as a USB keyboard, USB mouse, USB
storage device, or USB printer.

9. USB 3.1 Gen 1 connectors (2)

Connect USB-compatible devices, such as a USB keyboard, USB mouse, USB
storage device, or USB printer.

10. ThinkCentre

LED

This indicator is on when the computer is on.

11. Internal speaker*

Enable you to experience quality sound.

* for selected models

M75s-1 User Guide

Summary of Contents for 11A9000DUK





















































































































Search results

Summary of Contents for 11A9000DUK

Reviews:

Related manuals for 11A9000DUK

Brands by name

Popular brands

Lenovo 11A9000DUK, User Manual

Search results

Summary of Contents for 11A9000DUK

Reviews:

Related manuals for 11A9000DUK

Brands by name

Popular brands