Bauer
2 Safety
Safety instructions
GEL 8251
7
2 Safety
2.1 Safety
instructions
The operating software for the CompactController permits
on-line changes
to sys-
tem parameters during
operation
to make it easier to set up the plant and to make
service visits easier.
It is imperative on the utilisation of this feature that it is ensured no dangerous sit-
uations can arise for individuals in the area of the plant or for the plant itself by
●
Consciously and carefully checking prior to transmission every parameter to be
modified for correct application and for the possible effect (above all on changing
pitch rates)
●
Ensuring adequate protective measures as well as limit switches and emergen-
cy stop buttons are provided.
Do not disconnect any connectors or any screen connection with the device
switched on to avoid the occurrence of uncontrolled states.
Prior to updating the operating system (
), switch off the power cir-
cuits for the drives controlled by the CompactController.
2.2 Designated
use
The CompactController is only intended to be used for controlling and regulating drives
in the industrial sector.
On operation in residential, business and commercial sectors compliance with the re-
quirements on electromagnetic emissions in accordance EN 61000-6-3 is to be ensured
with additional external screening and filtering measures.
The PLC functionality makes it possible to execute customer control programs or control
programs supplied using the function implemented in the operating system for control-
ling drives.
The display and the keyboard make it possible, with appropriate programming, to use
the CompactController as an operator terminal for controlling operating states.
The devices are configured using system parameters. This action is undertaken either
on the device itself, via the PC editor software BB2100K supplied or via a loaded PLC
program.
The data and information given in this manual are to be followed.
Summary of Contents for GEL 8251
Page 4: ...4 GEL 8251 ...