Password protection and basic program
22
Enter the interval pause and the flush times
In
, select
=>
=>
=>
Enter the "
in minutes (m)
(1 minute is preset)
Enter the "
in seconds (s)
(00 seconds (s) is preset)
Enter the "
in seconds (s)
(00 seconds (s) is preset)
Press "ENTER" to complete all the entries
Duration of the analysis interval
The analysis interval is the addition of the "AUX before
analysis", "Internal flush" and "External flush" times and
the measuring value dependent analysis duration (see
diagram on the left)
Minimum interval = 1 litre, maximum interval = 9999 litres. The
analysis is carried out once the programmed water quantity has been
measured. The line and the measuring chamber are flushed prior to
the analysis (observe the programmed flush times).
Selecting the volume control
In
, select
=>
=>
=>
Press "ENTER" to confirm the selection
The menu on the left appears.
Enter the respective flow rate in litres
Press "ENTER" to confirm the entry
Selecting the type of water meter
Select the
menu
=>
=>
=>
Select the water meter constant (litre/impulse)
(100 litres/impulse " * " is factory set)
Press "ENTER" to confirm the selection
▼▲
▼▲
Volume controlled
Start via water meter
▼▲
Analysis
interval
Sequence of
times
NOTE