background image

Preface 

For  correct  installation  and  operation,  please  read  all  instructions  carefully.  Before 

reading the instructions, please be aware of the following items: 

(1) For the safe operation of this unit, please read and follow the instructions carefully.

(2) During operation, total capacity of indoor units should not exceed the total capacity of

outdoor units. Otherwise, poor effect of cooling or heating may result.

(3) Direct operators or maintainers should well keep this manual.

(4) If this unit fails to operate normally, please contact our service center as soon as possible

and provide the following information:

Content  on  the  nameplate(model  number,  cooling  capacity,  production  code,
ex-factory date).

Malfunction details(before and after the malfunction occurs).

(5) Each unit has been strictly tested and proved to be qualified before ex-factory. In order to

prevent units from being damaged or operating normally because of improper

disassembly, please do not disassemble the unit by yourself. If you need to disassemble

and check units, please contact our service center. We will send specialists to guide the

disassembly.

(6) Under the standby status, the unit will consume a little power for ensuring reliability of

complete unit, maintaining normal communication and preheating refrigerant. When the

unit won’t be used for a long time, cut off the power of the complete unit. However, please

preheat it when operating the unit next time.

(7) All graphics in this manual is only for your reference. For sales or production reasons,

these graphics are subject to change by manufacturer without prior notice.

User Notice 

This  appliance  can  be  used  by  children  aged  from  8  years  and  above  and  persons  with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they

have been given supervision or instruction concerning use of the appliance in a safe way and

understand  the  hazards  involved.  Children  shall  not  play  with  the  appliance.  Cleaning  and

user maintenance shall not be made by children without supervision.

Correct Disposal of this product 

This marking indicates that this product should not be disposed with other 

household  wastes  throughout  the  EU.  To  prevent  possible  harm  to  the 

environment  or  human  health  from  uncontrolled  waste  disposal,  recycle  it 

responsibly to  promote the sustainable reuse of material resources. To return 

your used device, please use the return and collection systems or contact the 

retailer  where  the  product  was  purchased.  They  can  take  this  product  for 

environmental safe recycling. 

R410A(R32/125:50/50):2087.5 

Summary of Contents for VRF VELD007N432U





























Reviews: