background image

Page 1

E

2018 Lennox Industries Inc.

Dallas, Texas, USA

RETAIN THESE INSTRUCTIONS

FOR FUTURE REFERENCE

SLO185UFV SERIES UNITS ARE NOT FOR
USE IN ZONING APPLICATIONS!

WARNING

Improper installation, adjustment, alteration, ser­
vice, or maintenance can cause injury or property
damage. Refer to this manual. For assistance or
additional information, consult a licensed profes­
sional installer, or equivalent, or service agency.

WARNING

Do not store or use gasoline or other flammable va­
pors and liquids in the vicinity of this or any other
appliance.

CAUTION

When venting this appliance, keep vent terminal
free of snow, ice and debris.

CAUTION

As with any mechanical equipment, personal injury
can result from contact with sharp sheet metal
edges. Be careful when you handle this equipment.

INSTALLATION
INSTRUCTIONS

DAVE LENNOX SIGNATURE

®

COLLECTION OIL FURNACE
UPFLOW  AIR DISCHARGE

SLO185UFV

 

Series Units

OIL UNITS

507263-01
08/2018
Supersedes 06/2017

Table of Contents

General

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Shipping & Packing List

1

. . . . . . . . . . . . . . . . . . . . . . . .

SLO185UFV Unit Dimensions

2

. . . . . . . . . . . . . . . . . . .

SLO185UFV Unit Parts Arrangement

3

. . . . . . . . . . . .

SLO185UFV Oil 

Burner Parts Arrangement

3

. . . . . . . . .

Requirements

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Combustion & Ventilation Air

5

. . . . . . . . . . . . . . . . . . . .

Locate & Level the Unit

6

. . . . . . . . . . . . . . . . . . . . . . . .

Adjustments

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Venting

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Flue Connections

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Supply & Return Air Plenums

10

. . . . . . . . . . . . . . . . . . .

Oil Supply Line Sizing

10

. . . . . . . . . . . . . . . . . . . . . . . . . .

Oil Supply Line & Filter Connections

12

. . . . . . . . . . . . .

Leak Check

12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Electrical

12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Blower Control

16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Unit Start Up & Adjustments

19

. . . . . . . . . . . . . . . . . . . .

Service

20

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Burner Control

21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting

22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General

These instructions are intended as a general guide and do
not supersede local codes in any way. Only licensed pro­
fessional technicians, or equivalent, can install and service
the Dave Lennox Signature

t

 Collection SLO185UFV oil

furnaces. In Canada, refer to CSA B139 for recommended
installation procedures. Consult authorities who have juris­
diction before installation.

CAUTION

Never burn garbage or paper in the heating system.
Never leave papers near or around the unit.

Shipping & Packing List

 1 - Assembled oil furnace

 1 - Barometric draft control

 1 - High fire oil nozzle (used to convert to high fire 105

and 141 inputs)

Check the components for shipping damage. If you find
any damage, immediately contact the last carrier.

Litho U.S.A.

Summary of Contents for SIGNATURE SLO185UFV Series





























Reviews: