Page 70 - IOM / Rooftop Smart and Linéa™ Range
USING THE KP02 MAINTENANCE CONTROL DISPLA
USING THE KP02 MAINTENANCE CONTROL DISPLA
USING THE KP02 MAINTENANCE CONTROL DISPLA
USING THE KP02 MAINTENANCE CONTROL DISPLA
USING THE KP02 MAINTENANCE CONTROL DISPLAY
Y
Y
Y
Y
Item
Minimum value
Maximum value
Hours and minutes
00-00H
23-59 H
Day of the month
1
31
Day of the week
1
7
Month
1
12
Year
0
99
For different types of data, the setting ranges are as
follows :
Changes are only incorporated when key [A] is pressed.
NOTE : The compatibility of the value for the day of the
month is not checked when it is entered. You might therefore
enter February 31st but when you try to validate, it will be
ignored and the preceding value stored.
3 - POWER SUPPLY
(LED 7 - figure 66)
When lit, the LED indicates that the machine is powered up.
4 - MODE
(LED 8 - figure 66)
This LED indicates the current operating mode.
In normal mode, i.e. within the programmed schedules, the
LED flashes.
In forced day mode, the LED is permanently on and in forced
night mode, the LED is off.
5 - FILTER DIRTY
(LED 3 - figure 66)
This LED indicates that the Climatic has detected that the
filter is blocked.
6 - GENERAL FAULT
(LED 9 - figure 66)
This LED indicates a general fault has been detected - refer
to "fault codes" section of this manual.
