Page 30 - IOM / Rooftop Smart and Linéa™ Range
FIL
FIL
FIL
FIL
FILTERS
TERS
TERS
TERS
TERS
FILTER
UNIT MODEL NO.
FILTER SIZE
SHA 010
406mm x 635mm x 25mm
SHA 013, 015
508mm x 635mm x 25mm
Filters are provided with all units. Filters are installed external
to the system in horizontal air flow applications. In downflow
air discharge applications install filters as follows.
1. Remove screw holding blower shipping bracket to
blower housing. Slide bracket to front and tip forward
to remove.
2. SHA010 - See figure 31.
Remove filter from behind the horizontal
supply air cover.
Slide filter into brackets in blower
compartment.
Match air flow arrows on filter to actual air
flow.
SHA 013, 015 units - See figure 32.
Remove filter from left side of blower
compartment and slide into brackets.
Match air flow arrows on filter to actual air
flow.
3. Replace panels and seal weathertight
NOTE : When installing 51 mm filters remove
filler piece in each bracket.
NOTE : In horizontal air flow configurations
remove brackets and filter.
Figure 31
SCA/SHA 010
Remove shipping
bracket
Securing
screws (right
side)
Right filter bracket
Filter bracket filter piece
(remove for 51mm filter)
Left filter bracket
Securing screws
(left side)
BLOWER
Figure 32
BLOWER
Remove shipping
bracket
Securing screws
(left side)
Left filter bracket
Filter bracket filter piece
(remove for 51mm filter)
Right filter
bracket
SCA/SHA 013 - 015
