11
MODE display
COOL
DRY
FAN
Transmission Indicator
Displayed when remote sends
signal to indoor unit
ON/OFF display
Appears when the unit is turned on,
and disappears when it is turned off
TIMER ON display
Displayed when TIMER
ON is set
TIMER OFF display
Displayed when TIMER
OFF is set
SLEEP display
Battery display
Displayed when
SLEEP function
is activated
FOLLOW ME
display
Indicates that
the FOLLOW ME
function is on
FAN SPEED display
Displays selected FAN SPEED:
HIGH,
MED,
or
LOW
NOTE - Blank when set to
AUTO speed or DRY mode.
Temperature/Timer display
Displays the set temperature by default, or timer setting
when using TIMER ON/OFF functions
Temperature range: 62-86°F
Timer setting range: 0-24 hours
NOTE - Blank when operating in FAN mode.
Low battery
detection
Figure 11. Remote Controller Display
6.3. Function Buttons
See “Figure 10. Remote Controller Function Buttons” on
page 10 for illustration for remote function buttons.
• Up arrow button
. Press to increase the temperature
setpoint or to scroll through settings options.
•
On/Off button
. Press to turn the indoor unit on or off.
•
Mode button
. Press to scroll through the operation
modes:
Cool → Dry → Fan
.
•
Fan speed
. Press to scroll through the fan speeds:
Low
→
Med
→
High
.
•
Sleep button
. Press to activate “night-mode”. This will
automatically increase (cooling) the setpoint 2°F (1°C)
per hour for the first two hours. The modified setpoint
will be set for five hours. After seven total hours the
indoor unit will shut off. Pushing the on button will turn
the unit back on.
• Turbo button
. Press to active turbo mode. The indoor
unit will ramp up to reach the setpoint more quickly.
After reaching the set point or after 30 minutes,
the indoor unit will resume the previous operating
conditions.
• Clean button
. Press to activate self cleaning mode. In
cooling or dry mode only, the indoor unit will temporarily
change operation to allow condensate on the indoor
unit coil to evaporate, and then will return to the
previous operating conditions.
Figure 12. Clean Function
NOTE:
Only available in COOL or DRY mode.
• Down arrow button
. Press to decrease the
temperature setpoint or scroll through settings options.
• Silence Function.
Hold the fan button for two
seconds to activate silence function. This operates
the compressor at low frequency and low fan speed to
reduce operating sound levels to a minimum.
NOTE:
Silence function may result in insufficient cooling
capacity. Hold the fan button for two seconds
again to stop the silence function.
• Timer ON button
. Press to set the number of hours of
delay before the indoor unit begins operation.
•
Timer OFF button
. Press to set the number of hours of
delay before the indoor unit stops operation.
• Swing button
. Press once to initiate louver left and
right oscillation. Press again to stop louver oscillation.
Louvers remain in place where stopped.
