14
Installer Checklist
Table 5. Installation Checklist
Item
Description
Yes
No
1
Is the zone sensor properly mounted to either a wall stud or wall? (Do not mount on
exterior wall or near any ventilation outputs, doorways or location that could be directly
exposed to sunlight)
2
Are all terminals wiring properly connected and tight?
4
Have all the zone sensor features been explained to the homeowner?
5
Has user manual been given to homeowner?
6
Was the correct thermostat wiring gauge used?
7
Are unused thermostat wires (conductors) wired together to minimize electrical
interference that could affect electronic components in the zone sensor. (See “Figure 3.
Communicating and Low Voltage Connections” on page 7.)
8
Was the hole in the wall sealed with a suitable material to prevent drafts from entering
the zone sensor case. Not doing so could affect the zone sensor internal temperature
sensor.
9
Did the zone sensor address get set correctly during initial power up of the zone sensor?
(Use either 2, 3 or 4)? See “Apply Power and Set Zone Numbers” on page 7.
10
When replacing an existing zone sensor did you set the address of the new or relocated
zone sensor to match the address of the zone sensor being replaced?
Summary of Contents for iHarmony Zone Thermostat
Page 16: ...16 ...
