26
17. Installation Checklist
Central Hub Checks:
YES
NO
1
Is the Central Hub properly mounted to either a wall stud or wall? (Do not mount on equipment or ductwork)
2
Is communication status LED (green) visible? When LED is active it indicates that 24VAC is present at the Central Hub. It also indicates communication is active
between Central Hub, Mag-Mount and Local Display.
3
Are all terminal wiring properly connected and tight?
Mag-Mount Checks:
YES
NO
1
Are all terminal wiring properly connected and tight?
2
Is the solid blue LED visible when the Local Display is removed? This indicates all wiring is correct. Blinking blue LED indicates the A and B communication wires
are reversed.
3
Is the solid blue LED not visible when the Local Display is removed? This usually indicates 12VDC to + and - is not present at the Mag-Mount terminals.
Local Display Checks:
YES
NO
1
Is the Local Display properly placed and connected to Mag-Mount? When properly connected, the Mag-Mount blue LED will be off.
2
Is the screen blank after initial power-up? The Local Display may take up to three minutes before anything appears on the screen due to a Local Display low battery
condition. Local Display battery charging only occurs when connected to the Mag-Mount.
System Checks
YES
NO
1
Is the Wi-Fi connected?
2
Can the owner access the web portal (www.myICON.com) from any PC or device with a web browser.
