confirm
press ’confirm’ to clear the
alert, or press ’cancel
cancel
was action taken?
yes
no
icomfort
Touch Screen 7−Day Programmable Thermostat
Page 19
Alerts − Page 2 of 4
Clearing alerts
A
critical alert
(red icon) identifies a system or device issue that can pre-
vent the system from working properly or at all, and if allowed to run,
could cause damage to the system. The issue raised by the alert must
be addressed before clearing the alert.
Press
clear
(see figure 27) to request
clearing of a critical alert; then
confirm
the request (shown to the right). The de-
vice will respond to the request indicating
whether or not the alert can be cleared at
that time. If it cannot be cleared, revisit
the alert issue and make repairs accord-
ingly.
The
edit date
option is not available for a critical alert.
A
service alert
(yellow icon) reminds users to service filters, humidifier
pad, UV light and PureAir
Air Purification system.
Press
clear
(see figure 27)
to request
clearing of a service alert. If you answer
no
to the was action taken" screen
(shown to the right), the alert reappears
and is not cleared. Action must be taken,
either to perform the maintenance re-
quired, or instead of clearing, you may
edit the time to again be reminded (de-
scribed later).
If you press
yes
to ’was action taken?’, the
Set new alert date" screen
(figure 28) appears. You may chose from the list of options or set a cus-
tom time (see figure 30).
set time for next reminder
disabled
3 months
6 months
12 months
24 months
custom time
select
set
alert description
ALERT 1 of 5
(Service) Alert Code − (0)
(Thermostat) reports:
(Replace Filter 1)
Latest Occurrence
(04/03/09)
(08:45 PM)
(4) Occurrences
press for more
cancel
Figure 28. Set new alert date
After selecting a time period using either method and pressing
set
, the
Cleared alert confirmation" screen (figure 29) appears.
done
the alert was cleared and
moved to alert history.
please press ’done’ to
return to the list of
active alerts.
alert description
ALERT 1 of 5
(Service) Alert Code − (0)
(Thermostat) reports:
(Replace Filter 1)
Latest Occurrence
(04/03/09)
(08:45 PM)
(4) Occurrences
press for more
Figure 29. Cleared alert confirmation
Press
done
to return to the device alert screen (figure 27, page 18).
