icomfort
Wi‐Fi
®
7-Day Programmable Communicating Thermostat
Page 23
NOTE - Firmware updates will not affect installer or user thermostat set
tings. Both will be retained after the update.
REGISTRATION
register
enter your email
re-enter your email
Register with icomfort thermostat Wi-Fi to enable
remote access and online weather information
System Desc
Wi-Fi
9:39 am January 23, 2012
WI-FI SETTINGS
connected
Wi-Fi
enabled
thermostat
not
registered
Connection to server has not bee established or it has been lost. Please
wait until a connection is established.
Firmware
update
auto
press to
change network
settings
press to enable
/ disable Wi-Fi
press to change
thermostat regis
tration
Wi-Fi
9:39 am January 23, 2012
press to toggle firm
ware update between
“auto” and “off”
NOTE
-
If any downloads are available for the thermostat they will start downloading
right away. When new firmware is being downloaded or when Gelaskins are
being installed, the thermostat screen will temporarily go blank and running
units may cease operation while the system is being reset to accommodate
the new changes. This is normal and can last a couple minutes.
(returns to
HOME
screen)
Figure 43. Registering the system for online access
For any issues with Wi-Fi connections, refer to Wi-Fi Troubleshooting
Checklist 507037-01.
Computer Login to the icomfort Wi-Fi
t
Server
Figure 44. Computer Login for Online Access
NOTE - This following information is customer setup instructions and
is shown here to allow the installer to help walk the customer through
the setup process.
