Page 3
G24M Parts Arrangement
G24M
PARTS IDENTIFICATION
VENT ADAPTER
CABINET TOP
G24M
CABINET
CABINET
BOTTOM
HEAT EXCHANGER
ASSEMBLY
BURNER
ASSEMBLY
BLOWER ASSEMBLY
COMBUSTION AIR
BLOWER
FLUE BOX
SECONDARY
LIMITS
FRONT LOUVERED
PANEL
DOOR INTERLOCK SWITCH
CONTROL
BOARD
TRANSFORMER
PRESSURE
SWITCH
NOx
TURBULATOR
LOW PRESSURE SWITCH
(Propane Only)
PRIMARY
LIMIT
G24M Gas Furnace
The G24M gas furnace is shipped ready for installation
in the upflow position. The unit can easily be converted
for installation in either
downflow or horizontal ap
plications.
The furnace is shipped with a bottom seal
panel in place for side return air in upflow applications.
Shipping and Packing List
Package 1 of 1 contains:
1 - Assembled G24M unit (includes vent adapter except
for 140 kBtuh units)
1 - Vent adapter (140 kBtuh units only)
The following additional items may be ordered separately,
if required:
1 - Thermostat
1 - External filter rack kit
1 - Hanging bracket kit
1 - Propane/LP changeover kit
Check equipment for shipping damage. If you find any
damage, immediately contact the last carrier.
Requirements
Lennox G24M units are American Gas Association (AGA)
and Canadian Gas Association (CGA) certified.
In the USA, installation of Lennox gas central furnaces must
conform with local building codes. In the absence of local
codes, units must be installed according to the current Na
tional Fuel Gas Code (ANSIZ223.1) in the United States.
The National Fuel Gas Code is available from the following
address:
American National Standards Institute, Inc.
11 West 42nd Street
New York, NY 10036
In Canada, installation must conform with current National
Standard of Canada CAN/CGAB149.1 Installation Code
for Natural Gas Burning Appliances and Equipment" and
CAN/CGAB149.2 Installation Code for Propane Gas
Burning Appliances and Equipment," local plumbing or
waste water codes and other applicable local codes.
