Lennox Compactair LVCK 22E, Installation, Operation & Maintenance Manual

Page: 3 / 52

2
Risk of injury with
rotating objects
Low
temperatures
High
temperatures
Risk of injury with
moving objects
Electrical
voltage
Abrasive
surfaces
FILTER CLEANING
Check the air filter and make
sure it is not blocked with dust
or dirt.
If the filter is dirty, wash it in a bowl with neutral
soap and water, drying it in the shade before
inserting it in the unit.
All technical data contained in these operating instructions including the diagrams and technical description remains the property
of Lennox and may not be used (except for the purpose of familiarizing the user with the equipment), reproduced, photocopied,
transferred or transmitted to third parties without prior written authorization from Lennox .
The data published in the operating instructions is based on the latest information available. We reserve the right to make
modifications without notice.
We reserve the right to modify our products without notice without obligation to modify previously supplied goods.
These operating instructions contain useful and important information for the smooth operation and maintenance of your
equipment.
The instructions also include guidelines on how to avoid accidents and serious damage before commissioning the equipment
and during its operation and how to ensure smooth and fault-free operation. Read the operating instructions carefully before
starting the equipment, familiarize yourself with the equipment and handling of the installation and carefully follow the instructions.
It is very important to be properly trained in handling the equipment. These operating instructions must be kept in a safe place
near the equipment.
Like most equipment, the unit requires regular maintenance. This section concerns the maintenance personnel and management.
If you have any queries or would like to receive further information on any aspect relating to your equipment, do not hesitate
to contact us.
The air filter cleaning operations do not
require technical service; however when
an electrical or mechanical operation
is required call an Engineer.
Electric shock hazard can cause injury
or death. Before attempting to perform
any service or maintenance on the
unit, turn OFF the electrical power,
and check that the fan has stopped.
Standard Guidelines to Lennox equipment
POINTS TO KEEP IN MIND
DANGER AND WARNING SIGNS
Make sure to open the power off switch before to install, repair or make maintenance works in the unit, in order to
prevent serious electrical injuries.
To install the unit, keep in mind local and national legislation.
ELECTRICAL CONNECTIONS
ATTENTION - WARNING