5
SELECTING UNIT OPERATING MODE AND SET-POINT TEMPERATURE
aut
set
Fan operating mode
1
set
If unit is working, the
or buttons
allow to select the desired room temperature (set-point).
The button allows the increase of the current set-point 0.5ºC.
The button allows the decrease of the current set-point 0.5ºC.
clock
set
mode
fan
hold
resume
The operating mode is always indicated on the display.
Pressing the
mode
button repeatedly the possible operating modes for the model of machine selected
are scrolled through:
COOL:
The unit is working on cooling mode, when compressor is working, the symbol will appear
on the display.
HEAT:
The unit is working on heating mode, when compressor or electrical heater are working, the
symbol will appear on the display.
AUTO:
The system automatically switches from cooling to heating mode, depending on the position of
the ambient temperature in respect to the set-point.
FAN:
The unit will work on fan mode, when fan is working, the symbol will appear
OFF:
The thermostat does not perform the regulation, the symbol appear on the display
To be able to select a fan operating mode, cool, heat or auto unit's operating mode must be selected
Pressing FAN side button scrolls through the following modes: FAN CONSTANTLY ON, or AUTO.
FAN CONSTANTLY ON:
Fan is continuous ON, the symbol will appear.
AUTO:
Fan on and off together with the compressor, the symbol will appear.
1
aut
The operating mode selected is active 5 seconds from setting,
when the respective sign stops flashing.
A ) SELECTING THE UNIT'S OPERATING MODE
C ) SELECTING THE FAN OPERATING MODE
B ) SELECTING DESIRED ROOM TEMPERATURE (SET-POINT)
