10
PROGRAMMING THE PARAMETERS
The parameters
are scrolled
using the front
buttons.
The modifications
are accepted by
pressing
set
again.
Proceed as follow, to reach the operating parameters of the unit:
To continue modifying other operating parameters follow steps 2-3-4.
To exit programming mode and accept the modifications to the parameters, press the
hold
button.
To exit programming mode, and NOT accept the modifications to the parameters, press the resume button, or wait
for 1 minute of inactivity (the final 15 seconds are signalled by the flashing of the characters on the display).
All modifications on the operating unit parameters, must be carried out by qualified personnel.
Incorrect programming of the parameters may cause damage to the unit. And consequently
the lost of guarantee to the unit.
clock
set
mode
fan
hold
resume
clock
set
mode
fan
hold
resume
clock
set
mode
fan
hold
resume
Step 1
Step 2
Step 3
Step 4
Step 5
Pressing simultaneously both
set
and
hold
buttons:
the display shows the first of the
unit operating parameters.
Parameters
allow a change
while they are
flashing.
Press
set
to accept
modifications.