Lennox BAC 024 SNM 3M, Installation, Operating And Maintenance Manual

Page: 91 / 102

• 87 •
BALTIC-IOM-0412-E / Control manual
Main
Top left :
Bottom right:
State mode based on the schedule, hour, minute, of CLIMATIC™ :
• Pressing the 'alarm' button directs you to the alarm list display.
• Pressing the 'prg' button directs you to rooftop setup menus display.
• Pressing the 'esc' button takes you to the selected rooftop choice display.
• Pressing the 'arrow' button increases the set point value.
• Pressing the 'enter' button takes you to the rooftop operation display.
• Pressing the 'down arrow' button decreases the set point value.
Bottom left:
Top right:
Night mode
Day mode
Day I mode
Day II mode
If the unit is in alarm, this symbol is displayed
• Small, numerical value: volatile set point temperature: View and/or modify the offset, or set point, of the desired temperature control
for the selected rooftop. Pressing the 'arrow' button increases the set point value. Pressing the 'down arrow' button decreases the
set point value.
If the setpoint is changed, this value is maintained as long as the rooftop scheduling doesn't change modes (night, day, day I,
day II, BMS).
At each change of the mode the CLIMATIC™ 60 sets the value of this setpoint on the preset value in the mode concerned.
• Big, numerical value: measured air temperature value in the conditioned space.
Control in heating mode or control in cooling mode
Ventilation state
DISPLAY DM60